| |
|
| |
HOTLINE
Tell : 04 3733 1699
KINH DOANH | HỖ TRỢ KỸ THUẬT |
| | |
| | |
Trực tuyến: 8 Lượt truy cập: 3,162,677 |  

|
|  | SẢN PHẨM | | AUTOMATIC TOTAL NITROGEN ANALYZER TN-308P |  |  | - Total nitrogen can be measured ranging from 0.01 mg/L. The analyzer provides measured values in well agreement with the manual analysis results.
- Total nitrogen can be measured within several minutes. In combination with the multi sampling unit (MASS-5), measurements can be taken with labor further saved.
- The analyzer prints out measured value bar graphs, setting conditions and other information in addition to the measured values (CV value and mean value).
|
|
| Specifications | | Measuring method | Measuring range | | Catalytic pyrolysis-chemiluminescence method | TN-308PL 0 to 1, 5 20, 200 mg/L TN-308PM 0 to 20, 200 mg/L |
|
Repeatability : CV value3% max. Measuring interval : Approx. 480 sec in case of 3-time measurements Printout : Measured value (CV value, mean value), measured value bar graph, setalue, calibration value, power failure mark, and other alarm marks Washing : Automatic washing of channel inside, dropping needle, catalyst, etc. with washing water Carrier gas : Compressed air Power requirements : 220VAC, 50/60Hz, Approx. 800VA (Other voltages available) Dimensions : 700(W) x 600(D) x 500(H) mm |
|
|
| |  | Các sản phẩm khác | |
|
|
| | Tìm kiếm nhanh | | | 

| |
| | |
| |
|